5 Best Free Online Gunsmithing Courses

Looking for 5 best free online gunsmithing courses you can do online? Then you are at the right post.

Anyone interested in getting their feet wet in the gunsmithing trade should read this thoughtfully collected post about the 5 best free online gunsmithing courses.

We hope that the information supplied is sufficient and that we’ve also made it easy to find other great resources, such as open educational resources.

Read on to learn about the 5 best free online gunsmithing courses you can undergo online.

What is Gunsmithing?

Before we rush to the 5 best free online gunsmithing courses you can learn online, let us know what is gunsmithing.

The term “gunsmithing” refers to the trade or craft of making or improving firearms through various means.

The process entails restoring firearms to working order by restoring them to their original state or configuration.

Read also: How to Get Job in Bank of America

Advantages of Taking Gunsmithing Lessons Online

Online gunsmithing classes have many advantages. Some of them that are discussed in this piece are listed below.

  • Thanks to modern conveniences, enrollment may be completed from any location with an internet connection, opening up the possibility of taking the course whenever it is most convenient for the student.
  • It prevents the waste of resources that could have been put toward getting somewhere else, keeping a place to stay, etc.
  • Although the investment in time and money required to complete a professional gunsmithing education can be daunting, one can find low-cost or even free courses in the subject online.
  • One can study at his or her own pace, thus there is some leeway.
  • Most textbooks and educational resources are routinely revised so that they align with the latest curricular requirements and standards.

Prerequisites for Online Gunsmithing Programs

You only need a device with an internet connection, such as a computer, smartphone, or tablet, to access the available free online gunsmithing classes.

Another thing to think about before signing up is how passionate you are about working as a gunsmith.

Here you can find links to several free online gunsmithing classes.

Details such as the program’s launch date, length, supported platforms, etc. are included in this packet.

The featured classes are listed below.

Read also: 15 Legit Work at Home Jobs

1. Introduction to Carpentry-Revised

One of the free online gunsmithing courses, Introduction to Carpentry- Revised introduces students to the fundamentals of carpentry and its specialized vocabulary.

It delves into the question of how much of each material type is needed for various construction tasks.

Stock manufacturers use their training to craft wooden stocks that are linked to metal during the gunsmithing process.

Staples, nails, screws, bolts, etc. are just some of the fasteners that will be covered in this course.

Both the use of epoxy anchors and the drilling of holes in hardened concrete or masonry are covered in detail.

Each of the 32 subjects in the course’s five modules provides a thorough introduction to the material covered throughout the program.

Time Required: 1.5-3 hours.

Read also: Top 20 High Paying Certificate Jobs in Canada For Foreigners

2. Metalworking: Methods in Production

Metalworking is one of the free gunsmithing courses available online.

And it is designed to teach students about the various production processes and metalworking procedures that are used throughout the industry.

To become a skilled gunsmith, one must become familiar with a wide range of tools and techniques, including a variety of presses, forging, rolling, extruding, and wire drawing.

A variety of shearing and sheet metal processes are also covered in training.

Students will leave with an understanding of the various techniques.

Used in the metalworking industry, including hot and cold working, rolling, forging, extrusion, wire drawing, press, etc.

There are three sections to this training course, and together they cover 15 subjects.


Approximately four to five hours in length

3. Mechanics of Safely Using Tools (Course 160)

One of the free online gunsmithing courses, Tool Safety – Basic (Course 160) teaches students how to use hand and portable power tools safely.

Because they rely heavily on hand tools like chisels, punches, mallets, etc., gunsmiths really need this training.

The necessity of using the right tool for the job is also discussed, as are the five recommended practices for using hand tools, the most common moving parts on power tools, and more.

Each of the 14 subjects in the course’s two modules provides a thorough introduction to the material covered throughout the program.

This event will last for 1 hour.

Read also: How to Share a Job Posting on Linkedin

4. Tutorial on the Basics of Machine Shop Equipment

One of the many free online gunsmithing courses, “Fundamentals of Workshop Technology,” teaches students the fundamentals of the workshop technology they’ll need to build their skills.

It delves into the fundamentals of what makes a workshop tick.

Since gunsmiths spend a lot of time in the workshop, it makes sense that learning workshop skills and how to handle various tools would be beneficial.

After finishing the course, students will be able to explain how to use a variety of tools for marking and measuring, as well as how to handle and work with wood, drill, and countersink.

In total, there are 13 distinct subjects spread across 3 distinct modules in this training course.

The journey will take between five and six hours.

5. Fusion 360: The Metal Designer

Learners can use Fusion 360, one of the free online gunsmithing courses.

To gain the “know-how” necessary to use cloud-based, easily accessible CAD and CAM tools to design metal parts for machining.

In this course, you’ll learn how to use Autodesk Fusion 360, a 3D modeling program.

And the CAM tool it comes with to create efficient designs for metal subtractive production.

Course graduates will have a firm grasp of design for metal fabrication.

Enhanced proficiency with solid modeling, enhanced communication and simulation abilities, and an enhanced ability to create their own designs.

There are 4 sections totaling 13 subjects, each of which provides a thorough introduction to the training’s essential concepts.

It will take between one and two hours.

0 Shares:
Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like